Clarke WE6527 160EN 240-Volt Fluxcore/MIG Welder

Clarke WE6527 160EN 240-Volt Fluxcore/MIG Welder Review

Clarke WE6527 160EN 240-Volt Fluxcore/MIG Welder Feature

• Weld Steel, Aluminum, Stainless Steel and Cast Iron
• Automatic Thermal Overload Protection
• Tweco type torch with full ON/OFF safety control
• Weld up to 1/4" in a single pass. With the 30 to 150 Peak Amps
• 6 power setting and Fan cooled

Features and Benefits Advanced thermal overload protection for transformer Electronic variable wire feed control Six power settings for maximum welding heat control Easily changed to Mig welding for stainless steel and aluminum Fan cooled for better performance This wire welder welds up to 1/4" in a single pass.  CSA approved Specs: Input: 230 volt - 60 HZ; 22.5A 1PH Output: 120A @ 20VDC-25% MAX O.C.V.=30VDC MAX 150A 22" x 11.6" x 15.4" Weight: 63 lbs.

Northern Industrial Welders Auto-Darkening Welding Helmet with Grind Feature

Northern Industrial Welders Auto-Darkening Welding Helmet with Grind Feature Review

Northern Industrial Welders Auto-Darkening Welding Helmet with Grind Feature Feature

• Solar-powered auto-darkening lens charges with exposure to welding or sunlight
• Excellent lower amperage TIG responsce (?5 Amps)
• High-level, quality LCD ensures the welding spot appears more clearly and protects your eyes from fatigue after extended use
• 2 independent arc sensors
• Variable shades 9-13 auto-darkening with sensitivity and delay adjustment

This Northern Industrial welding helmet is designed for both welding and grinding applications. The lightweight helmet's 1/25,000 second switch time automatically darkens the lens the instant you start welding. Plus, the helmet acts as a protective shield when grinding by preventing the lens from darkening. Auto Darkening: Yes, View Area W x H (in.): 3 13/16 x 1 3/4, Switch time (sec.): 1/25,000, Adjustable Sensitivity: Yes, Variable Shades: 9 - 13, UV/IR Coated Lens: Yes, Adjustable Fit: Yes, Power Supply: Solar, Base Type: Auto darkening, Low Battery Indicator: Yes, Battery Included: Yes, ANSI Approved: Yes, CSE/CE Standard: CE

Factory-Reconditioned Campbell Hausfeld RBWS280000 230-Volt AC Stick Welder

Factory-Reconditioned Campbell Hausfeld RBWS280000 230-Volt AC Stick Welder Review

Factory-Reconditioned Campbell Hausfeld RBWS280000 230-Volt AC Stick Welder Feature

• Reconditioned Campbell Hausfeld products have a One Year warranty through the Campbell Hausfeld factory or an authorized service center
• Welds from up to 3/8 Inch mild steel
• 230 Volt 50 Amp input
• Use welding rod sizes 1/16 Inch to 1/8 Inch
• Factory Reconditioned.

Duty cycle: 20% @180 amps. Amp control dial provides infinite output adjustment. Integrated thermal overload circuit & breaker for added protection. Built-in storage for rods, cords, helmet and accessories. (Electrode containers not included). Quick-connect dense plugs for easy removal and storage of cords. Multi-position cart allows the welder to be placed vertically or horizontally for easy access to controls, 230V single-phase welder easily welds thick steel. 225 amp AC maximum output. Infinite shunt control offers more precise adjustment when matching welder heat to metal thickness. Integrated cart for greater portability and convenience. Includes a starter pack of stick electrodes, chipping hammer/brush, and protective face shield. 5 year manufacturer's warranty.

Factory-Reconditioned Campbell Hausfeld RBWF200000 115 Volt Wire Feed Welder (Flux Core Only)

Factory-Reconditioned Campbell Hausfeld RBWF200000 115 Volt Wire Feed Welder (Flux Core Only) Review

Factory-Reconditioned Campbell Hausfeld RBWF200000 115 Volt Wire Feed Welder (Flux Core Only) Feature

• Reconditioned Campbell Hausfeld products have a 90 days warranty through the Campbell Hausfeld factory or an authorized service center
• Welds from 24-gauge to 3/16 Inch steel
• Great for use around the home projects autobody, mufflers and more
• Uses .030 Inch and .035 Inch wire size in either 4 Inch or 8 Inch spools
• Factory Reconditioned. Physical appearance WILL VARY depending on stock availability

This is a factory reconditioned product. Reconditioned generally means that the product has been returned to the manufacturer, who brings the product back to like new condition. Some products may contain cosmetic blemishes. Includes 115 Volt Wire Feed Welder - WF200000RB

Bessey WSM-9 7-Inch Welders Angle Clamp

Bessey WSM-9 7-Inch Welders Angle Clamp Review

Bessey WSM-9 7-Inch Welders Angle Clamp Feature

• Unobstructed working area allows free access for welding or assembly operations and through-ways for T joints
• Two-way swivel mounted spindle automatically adjusts the clamping block to work pieces of different thicknesses
• Holds work pieces at a 90-Degree angle
• Ideal for plates, angle iron, square tubing, pipe, channel iron, etc
• BESB9

Bessey WSM-9 90 Degree Angle Clamp Mfg# WSM-9 Features: * Automatic adjustment to work pieces of different thicknesses * Precise 90 angles Jaw Height: 1-3/8" Capacity for both sides: 7" Max Passage for Mitres: 3-1/2"

Campbell Hausfeld WS0990 115-Volt Stick Welder

Campbell Hausfeld WS0990 115-Volt Stick Welder Review

Campbell Hausfeld WS0990 115-Volt Stick Welder Feature

• Great for small repairs and hobby welding
• Runs on standard 115V power
• Dual heat setting and thermal overload protection
• Versatile design welds mild and stainless steel from 18 ga. To 1/8 in.
• Durable metal welder with comfort fit handle

Campbell Hausfeld 115V Stick Welder. A user - friendly welder that out - performs its size! Compact design, BIG performance! Easy to use, with a smooth arc that even novice welders can command with ease. Perfect for work on sheet metal, vehicle trailers, home appliances, and outdoor equipment like lawnmowers. Easy to start, easy to use, easy to carry, and easy to store... the choice for pros and novices alike! More: Works with standard 15 or 20-amp household outlets; Capable of welding mild and stainless steel from 18-ga. to 1/8"; Dual heat settings: preset for 1/16" or 5/64" welding rods; Thermal overload shut-off protects welder by shutting down when the duty cycle has been exceeded; Duty cycle: 10% @ 70A; 5-yr. limited manufacturer's warranty; Weighs only 23 lbs.; Includes hammer / brush, electrode starter pack , and hand shield. A real handyman's helper! Order yours today! Campbell Hausfeld 115V Stick Welder

Anchor Brand 601922-88-06 50' 8/3 40a Stw Blue Welder Ext Cord Lighted End (1 EA)

Anchor Brand 601922-88-06 50' 8/3 40a Stw Blue Welder Ext Cord Lighted End (1 EA) Review

Anchor Brand 601922-88-06 50' 8/3 40a Stw Blue Welder Ext Cord Lighted End (1 EA) Feature

• Conductor Size 1=8/3 AWG, Cable Marking=STW, Length=50 ft, Color=Blue, Voltage=250.

Anchor Brand 601922-88-06 50' 8/3 40a Stw Blue Welder Ext Cord Lighted End (1 EA)

Neiko 3-Piece Locking Welding Clamp Set

Neiko 3-Piece Locking Welding Clamp Set Review

Neiko 3-Piece Locking Welding Clamp Set Feature

• Hardened Steel Jaws with Adjustable Pressure
• C-Clamp: 11 Inches
• Sheet Metal Clamp: 10 Inches
• Welding Clamp: 10 Inches
• Quick Lock and Release Handles

Set of three high quality welding clamps, 3-piece welding clamp set features one 11-inch - C-Clamp, 10-inch sheet metal clamp, 10-inch welding clamp. Quick lock and release handles. Adjustable jaw pressure, hardened steel jaws.

Clarke 130EN Mig/Fluxcore 110V Welder Gas/No Gas KIT

Clarke 130EN Mig/Fluxcore 110V Welder Gas/No Gas KIT Review

*NEW* Clarke USA 130EN MIG/Fluxcore Wire Welder KIT plus regulator kit, helmet, welding gloves, and welding cart (110V) This NEW in factory sealed box Clarke 130EN MIG/Fluxcore Wire Feed Welder KIT is easily converted from Fluxcore to Gas welding with the new Clarke gas regulator kit that comes with this and will weld up to 1/4" inch steel in a single pass! New welder comes with gas regulator kit, welding cart, welding helmet, welding gloves, roll of wire, chipping hammer/brush, and manual as well! Features Tweco-style torch with full On/Off Safetly Control. Electronic wire speed control and 4 variable heat settings allow you to precisely adjust the welder to your needs. Operates on standard 110 volt electrical supply. 120 V Wire Welder Tweco-style torch with full On/Off Safety control Advanced safety overload protection for transformer Electronic variable wire feed control 4 power settings for maximum welding heat control Welds steel, stainless steel, aluminum, or cast iron Fan cooled for better performance Welds up to 1/4" in a single pass Uses Fluxcore or solid steel welding wire Welds with or without gas Tough metal casing 200 Amp ground clamp CSA approved Input: 120V, 60 Hz, 13A, 1 Ph Ouput: 60A @ 21VDC - 40% MAX O.C.V. = 30 VDC MAX 85A

Jorgensen Anti-Spatter Welder's "C" Clamp - 3-7/8" Opening

Jorgensen Anti-Spatter Welder's "C" Clamp - 3-7/8" Opening Review

Jorgensen Anti-Spatter Welder's "C" Clamp - 3-7/8" Opening Feature

• Sold individually
• Opening 3-7/8"
• Throat depth 6"
• Protected against spatter
• Excellent value

Great clamps offer regular-service load capacties and extraordinary value. Protected against spatter in all types of welding operations.

Smith Little Torch Soldering Welding & 5 Tips, Hoses

Smith Little Torch Soldering Welding & 5 Tips, Hoses Review

Smith Little Torch Soldering Welding & 5 Tips, Hoses Feature

• Makes a thread-thin flame up to 6300 degrees F.
• Welds: Fuses materials as thin as .001" up to 16 gauge
• Brazes: Joins steel, brass, copper, silver, and gold.
• Solders: For soft or hard (silver) soldering
• Heats: Softens or melts metals, glass, even ceramics

Smith Little Torch For Jewelry Repair, Manufacture, Hobby, Crafts, Electronics Repair, Metal Sculpture, Plumbing and Glass Blowing. This is a new Little Torch. Smiths Little Torch welds an unlimited range of materials, brazes and solders the tiniest elements with ease, yet produces enough heat to weld steel up to 1/8" thick or melt 3 oz. of silver. Infinite Control. Weighing only 1.5 ounces, The Little Torch is easily maneuvered in areas impossible to reach with conventional torches. Variety of Flame Settings and Sizes. Produces a perfectly controlled, stable flame hot enough to melt commercially weldable metals, glass and ceramics with thread-thin flames up to 6000 degrees F. Unmatched Flexibility. Works with any commercially used fuel gas, and strong, flexible hoses connect to any standard pressure regulator. When you pick up The Little Torch, you know immediately that you are holding a magnificent instrument which will enable you to extend your skills far beyond all previous limits. Whether you are in the first stages of learning your craft or have mastered it completely with more limited tools, The Little Torch will open a new world of possibilities for you. This superbly balanced torch with a rugged aluminum alloy body weighs only 1.5 ounces. The Little Torch features a thin, extremely lightweight hose which provides added maneuverability. In short, The Little Torch is designed to meet the most exacting industrial standards for a small, multipurpose torch. The Little Torch has unmatched flexibility -- it can be used with several fuels including acetylene, hydrogen, propane, propylene, MAPP, or natural gas. It produces a perfectly controlled, completely stable flame hot enough to melt commercially weldable metals, glass and even ceramics. The included tips provide a wide range of flame lengths and heat output for various metals and thickness.

VICTOR TYPE WELDING KIT - WELDER

VICTOR TYPE WELDING KIT - WELDER Review

VICTOR TYPE WELDING KIT - WELDER Feature

• Twin hose: 15ftx1/4"
• INCLUDES:Torch handle,Cutting attach
• Oxygen regulator, Acetylene regulator,
• Weld nozzles --No. 0 No.2 No. 4,
• Cutting nozzle,tip cleaners,Goggles,Spark lighter

Torch handle...Cutting attach...Oxygen regulator...Acetylene regulator...Weld nozzles --No. 0 No.2 No. 4--- Cutting nozzle...Twin hose: 15ftx1/4" c/w fittings...tip cleaners...Goggles...Spark lighter

Miller 230015 Tune-Up Filter Kit,Kohler (Ch23) Pkg =

Miller 230015 Tune-Up Filter Kit,Kohler (Ch23) Pkg = Review

 Miller Electric Tune Up Kit Model: 230015 Tune up kit for Kohler CH23 engine on Miller Legend, Bobcat and Trailblazer engine drive welder

Pro-Series MMIG125 125 Amp Fluxcore MIG Welder Kit

Pro-Series MMIG125 125 Amp Fluxcore MIG Welder Kit Review

Pro-Series MMIG125 125 Amp Fluxcore MIG Welder Kit Feature

• Includes ground cable with clamp, welding gun, spool of flux cored wire, face shield and brush hammer
• Thermal overaload protection, 80-125 Amps, Duty cycle 20% at 80 Amps
• Wire size: .030-.035, Heating settings: two
• Max metal thickness: 18 guage / 3/16 inch
• For small to medium sized welding jobs around the home, garage or farm, welds all types of carbon steel.

MMIG125 Features: -Fluxcore MIG welder kit. -Pro Series collection. -Includes ground cable with clamp, welding gun, spool of flux cored wire, face shield and brush hammer. -Thermal overload protection. -Two heat settings. -No assembly required. Specifications: -Amps: 80 (Max 125). -Duty cycle 20pct at 80 Amps. -Wire size: 0.030 - 0.035''. -MAX metal thickness: 18 Gauge / 0.19''.

Lincoln Electric K2501-1 Century 80GL Wire Feed Welder

Lincoln Electric K2501-1 Century 80GL Wire Feed Welder Review

Lincoln Electric K2501-1 Century 80GL Wire Feed Welder Feature

• Ideal for general purpose metal repairs and building projects
• Safe cold wire design, arc is not established until trigger is pulled
• Welding range of 35 to 88 amps covers many tasks
• Can weld 18 gauge sheet metal up to 1/8 inch steel
• 1 year warranty on parts and labor (90 days on gun and cable)

Easy - to - use Century 80GL Wire Feed Welder plugs into a standard outlet and requires NO gas. BIG BUCKS OFF! Weld like a pro at home and SAVE BIG! Use this fast, continuous-feed Welder for a wide range of utility projects. Ideal for repairing tools, auto body, machinery and more. This gasless unit carries the respected Century name for top quality and lasting performance. Seems my special arrangement "zaps" BIG BUCKS OFF the usual price! Amazing deal! Details: Flux core design requires no gas; Plugs into standard 110V outlet (20 amp circuit); Current / Voltage / Duty Cycle: 70A/21V/20%; Average range: 35-88 amps; Welds up to 18 ga. sheet metal or 1/8" thick steel; 2 preset heat ranges; Uses .035 flux core wire on 4" spools (available at local welding supply store); Squeeze trigger to weld; Long-life insulated transformer; Includes welding gun, nozzle, tips, .035 4" spool of flux core wire and manual; Size: 9 x 18 x 13"h. weighs 42 lbs. UL-listed. Tell Santa you want this baby. Order Today! Century 80GL Wire Feed Welder

Campbell Hausfeld WG2060 90 Amp MIG/Flux Versa-Arc Welder

Campbell Hausfeld WG2060 90 Amp MIG/Flux Versa-Arc Welder Review

Campbell Hausfeld WG2060 90 Amp MIG/Flux Versa-Arc Welder Feature

• Versa-arch welder powered by 115-volt current
• Welds 24-gauge to 3/16-inch steel
• Four settings for use on metal with varying thickness
• Polarity control switches between MIG and Flux settings
• 5-year limited warranty

The Campbell Hausfeld WG2060 95 Amp MIG/Flux Versa-Arc welder can handle 24-gauge to 3/16-inch steel and accepts wire sizes of .024 inch, .030 inch, and .035 inch on 4-inch or 8-inch spools. A built-in gas liner and valve make the Campbell Hausfeld WG2060 welder MIG ready. Switch between MIG and Flux settings with the external polarity control. The welder's independent drive deck transformer provides consistent wire speed to make smoother welds. An automatic shut-off feature prevents overheating, and the infinite wire speed gives you the control to make precise adjustments for an even weld bead. The rotary heat switch has four settings to adjust output power to different metal thicknesses, and the professional torch and trigger-activated arc provide precise placement of your welds. This professional torch is equipped with trigger activated arc for easy start, is powered by a 115-volt current and generates 70 Amps of power. The Versa-Arc welder includes a welding shield, hammer/brush, starter spool of flux core wire, quick-start guide, and MIG regulator, hose, and clamps. Campbell Hausfeld backs its welder with a 5-year limited warranty.

What's in the Box
Welder, welding shield, hammer/brush, starter spool of flux core wire, quick-start guide, and MIG regulator, hose, and clamps.

SIMADRE 5020D 50 AMP PLASMA CUTTER 200A TIG ARC MMA WELDER

SIMADRE 5020D 50 AMP PLASMA CUTTER 200A TIG ARC MMA WELDER Review

SIMADRE 5020D 50 AMP PLASMA CUTTER 200A TIG ARC MMA WELDER Feature

• SIMADRE POWERFUL 200 AMP TIG, 200 AMP ARC/MMA and 50 AMP PLAS MA CUTTER! DUAL VOLT 110V & 220V !!!
• WITH HIGH-PERFORMANCE SG-55 60A TORCH
• BRAND NEW IN THE BOX with ACCESSORIES and FREE CONSUMABLES!
• THREE MACHINES INTEGRATED IN ONE

* Foot Pedal Ready.... * 200 Amp Tig Torch.... * 200 Amp Arc/MMA Welder.... * Digital Current Display.... * SG-55 High Performance Cutting Torch.... * Automatic sensing of incoming power source voltage and frequency 120V/240V-50/60HZ (functions between 90 & 260 volts.).... * Works in both 50 and 60 Hz with operating air pressure of 70 psi @ 4 cfm..... * Machine is equipped with a large cooling fan and is thermostatically protected for a longer life span..... * Advanced inverter technology means high cutting and welding performance..... * The newer semiconductor circuits in these machines are extremely well-designed. With reasonable care, your welder will provide you with many years of trouble-free service.... * Plasma Cutter is 3/4" rated with 1" severance cuts.... * Tig Welder has a 5/16" weld thickness and a high frequency non-contact start..... * Arc/MMA Welder has a 3/16" weld thickness.... * CE, CCC, CSA and ISO-9001 certification.... * It comes with 1-YEAR machine warranty.... * Plasma cutting torch with 16.5 ft (5m) hose..... * Tig Welding Torch with 11 ft hose (with long and short caps).... * Ground cable (9 ft) with clamp. .... * Stick (ARC) Holder.... * Initial 60A SG-55 Consumables.... * User Manual.... * You shall provide 60~70 psi air supply, 110v or 220v power plug for plasma cutting.... * You shall provide argon regulator & tank for tig welding .... ** Specifications: * Input voltage AC 110/220±15% 50/60Hz.... * Input Power Capacitance 7.1 kva.... * No-load loss(W) 40.... * Duty cycle (%) 60.... * Power factor 0.93.... * Efficiency (%) 85.... * Insulation class B.... * Protection class IP21 TIG MMA CUT.... Input current(A) 21 32 28.6.... Rated output current 200A 200A 50A.... Current range 15-200 15-200 20-50.... No -load voltage(V) 62 62 250.... Cut thickness(mm) - - 1-16.... Arc-leading HF vibrate Touch HF vibrate....