Vaper 41185 90 Ampere Gasless Wire Feed Welder

Vaper 41185 90 Ampere Gasless Wire Feed Welder Review

Vaper 41185 90 Ampere Gasless Wire Feed Welder Feature

• Includes: welding shield, welding ha millimeter/brush, sample spool of flux-core wire, cold contactor mig torch for added safety
• Amperage range: 60 - 90 amps
• Uses 0.030 inch to 0.035 inch diameter flux-core wire

Vaper 41185 90 Ampere Gasless Wire Feed Welder features an easy-to-use gasless flux-core wire welder for the beginner. It is perfect for light duty repairs, maintenance and fabrication on light gauge steel around the home, workshop and garage. It welds up to 1/8 inch thick mild steel and is not suitable for aluminum. It operates on 120V single phase power. The amperage range: 60 - 90 amps. It uses a 0.030 inch to 0.035 inch diameter flux-core wire. It has a thermal overload protector that automatically shuts off the welder when the duty cycle is exceeded. The one year limited warranty includes: welding shield, welding hammer/brush, sample spool of flux-core wire, cold contactor MIG torch for added safety, earth clamp and welding cable.

MIG 100 Flux Wire Welder

MIG 100 Flux Wire Welder Review

MIG 100 Flux Wire Welder Feature

• ETL approved flux wire welder
• Adjustable positions and cycles
• Comes with two pounds of flux wire and more

90 Amp Flux wire, 120Volt / 60Hz, ETL approved. No Load Voltage: 31 Volt, adjustment positions: 2 steps. Range of current 50 to 80 Amp. Duty cycle: 15% at 80A, 20% at 65A. Rated duty cycle: 10% at 90amps. Insulation Class: F, welding wire size is 035 to 040 inches. Includes: Welding torch, tip, grounding cord with clamp Brush / hammer, Face shield, Flux cored wire .030 inch (2 pounds).

Thunderbolt XL 225 AC Stick Welder, 1- Phase, 30 - 235 AC

Thunderbolt XL 225 AC Stick Welder, 1- Phase, 30 - 235 AC Review

MIL903641 The Thunderbolt XL 225 AC is an economical AC Stick welding power source with precise, dependable control to get the exact heat you need - always. Exclusive patented Accu-Set amperage indicator provides accurate heat control with infinite amperage control. Unit allows higher duty cycle when amperage decreases, unlike some competitive products in market. Infinite current control allows precise weld output adjustment; get the exact heat you need to produce a better weld. Output selector switch allows you to quickly select low or high range without adjusting the output leads. Forced-draft cooling fan ensures a cooler running product, extending the life of the power source. Thunderbolt XL 225 AC certified by Canadian Standards to both the Canadian and U.S. Standards. Features: -Power source -15 ft (4.5 m) No. 4 electrode cable with heavy-duty electrode holder -10 ft (3 m) work cable with clamp -Power Cord -Note: Does not include wall receptacle. Applications: -Light Industrial Applications: -Home and Farm use -Garage/Job Shops -Plant Fabrication/Maintenance -Vocational Process: -Stick (SMAW) Specifications: -Input Power: Requires 1-Phase Power -Rated Output: AC: 225 A at 25 VAC, 60 Hz (15pct Duty Cycle at 50 Hz) -Welding Amperage Range: AC: Low 30 - 150, High 40-235 -Dimensions: -H: 18 3/4 in -W: 12 3/4 in -D: 17 1/2 in -Net Weight: 85 lbs Warranty: -Power source is warranted for 3 years, parts and labor -Original main power rectifiers are warranted for 5 years

Pro Series AWELD160 160 Amp Arc Welder, Black

Pro Series AWELD160 160 Amp Arc Welder, Black Review

Pro Series AWELD160 160 Amp Arc Welder, Black Feature

• 230 volt, single phase 60 Hz
• Stepless current regulation 55 amp to 160 amp
• Automatic overload protection
• Includes wheels, wire brush/chipping hammer, mask, ground clamp
• It is compact and great for use in the shop, garage or home

Zzz-ap! Buffalo Tools Arc Welders perform quick repairs. 160-amp. PRICED RIGHT! Compact electric miracle workers! These transformer-type Welders are great for making repairs, instant brazing and soldering with a carbon arc torch. Also ideal for maintenance work, auto body and general-purpose welding. For home, garage or the shop. Good news. My special buy zaps the usual price! Features: Operation on 230V, single phase, 60 hz; 80" power cord; 6'4" AWG single insulation ground cable and torch cable; Thermal overload protection (10-minute shut-down, 3-minute back on); Full-range, continuous current adjustment, no plugs to change; Includes handled face shield and wire / slag brush; CE certified. Stepless current regulation: 55 amps to 160 amps; Top pull / carry handle; Roll-about wheels; Measures: 9 5/8 x 15 x 15"h., weighs 40 lbs. Get yours today! 160-amp Buffalo Tools Arc Welder

US Forge Welding Economy Chipping Hammer

US Forge Welding Economy Chipping Hammer Review

US Forge Welding Economy Chipping Hammer Feature

• Made of hardened steel for longer tool life
• Spring handle designed to absorb the shock of contact while cleaning and shipping way welding debris
• Heads have a chisel on one side and a point on the other to get into tight spots

Made of hardened steel with a spring-type handle to absorb the shock of contact while cleaning and chipping away welding debris. The hammer incorporates drop forged heat treated head welded to steel shaft to ensure safety and longer life.

Clarke 160EN Mig/Fluxcore Gas/No Gas 220V Welder KIT

Clarke 160EN Mig/Fluxcore Gas/No Gas 220V Welder KIT Review

Clarke 160EN Mig/Fluxcore Gas/No Gas 220V Welder KIT Feature

• NEW

New Clarke 160EN 220V welder KIT which includes regulator kit, welding cart, welding gloves, and welding helmet This new in factory box Clarke 160EN mig/fluxcore 220V wire welder KIT is easily converted from fluxcore to gas welding and will weld 1/4 in. steel in a single pass. Electronic wire speed control and 6 variable heat settings allow you to precisely adjust the welder to your needs and is fan cooled for better performance. Operates on 220 volt electrical supply. You will be getting this new in factory box Clarke 160EN welder along with new gas regulator kit, welding cart, welding gloves, welding helmet, roll of wire, chipping hammer/brush, welding mask, and manual as well. Features: 220V wire welder Welds with or without gas Advanced thermal overload protection for transformer Electronic variable wire feed control Six power settings for maximum welding heat control Fan cooled for better performance Weld up to 1/4" in a single pass Welds steel, stainless steel, aluminum, or cast iron Easily changed to mig welding for stainless and aluminum Tough metal casing CSA approved Input: 230V, 60 Hz, 22.5A, 1 Ph Ouput: 120A @ 20 VDC - 25% MAX O.C.V.=30 VDC MAX 150A

3-in-1 50A Plasma 1/2" Cutter 200A Tig Stick Arc MMA Welder With Pedal 110V NEW

3-in-1 50A Plasma 1/2" Cutter 200A Tig Stick Arc MMA Welder With Pedal 110V NEW Review

3-in-1 50A Plasma 1/2" Cutter 200A Tig Stick Arc MMA Welder With Pedal 110V NEW Feature

• Advanced inverter technology, small size and light weight, easy to carry, Creative, effective and low cost.
• Three functions integrate to be one: MMA, TIG and CUT, widely used, convenient operation, understandability, and production efficiency improved greatly.
• Plasma cutter suited to cut steel, stainless, plating steel, copper, titanium, nickel and all other alloy material, as well as all kinds of metal plates. Cuts up to 1/2" thick.
• Fan-cooled, automatic protection of over-voltage and over-current, thermostatic protection, moveable welding cable.
• 1 Year Warranty.

Items Included

• Inverter DC TIG/ARC (MMA) Welder Cutting Machine.
• 10' TIG Torch
• 10' 50A Cutting Torch
• MMA clamp & cable
• Ground clamp & cable
• TIG cap (long)
• Argon Regulator (US type)
• Air Regulator
• (11) x Plasma Tip
• (11) x Plasma Electrode
• (6) x Plasma Shield Cup
• (5) x Plasma Swirl Ring
• (5) x TIG Collets
• (5) x TIG Collet Body
• (4) x TIG Nozzle
• (2) x 1/4" barbed air hose fittings
• (2) x 1/4" hose clamps
• (1) x Quick connect fitting
• (1) x Foot Pedal.
• Owners Manual